CD-SSEP (high efficiency exhaust single-screw extruder).The extruder used for those prone to degradation, water-absorbing material processing, using such kind of extruder, material may not require predrying, vacuum exhaust in the machining process, taking the small molecules and water vapor and direct molding.Belong to this kind of materials are: ABS/PMMA/PC/PA/PEEK/PEI.
CD-SSEP Technical parameters
规格
Specifications
|
螺杆直径 mm
Screw diameter
|
L/D
|
电机KW
Motor
|
最大挤出量kg/hr
Max output
|
|
|
CD-SSE 30
|
30
|
33
|
7.5
|
30
|
|
CD-SSE 45
|
45
|
36
|
37
|
180
|
|
CD-SSE 55
|
55
|
36
|
45
|
210
|
|
CD-SSE 65
|
65
|
36
|
75
|
320
|
|
CD-SSE 75
|
75
|
36
|
90
|
420
|
|
CD-SSE 90
|
90
|
36
|
132
|
600
|
|
CD-SSE 120
|
120
|
36
|
200
|
950
|
|
CD-SSE 150
|
150
|
36
|
315
|
1300
|
|
CD-SSE 180
|
180
|
36
|
355
|
1500
|
|
2. CD-SSEP (high efficiency exhaust single-screw extruder).The extruder used for those prone to degradation, water-absorbing material processing, using such kind of extruder, material may not require predrying, vacuum exhaust in the machining process, taking the small molecules and water vapor and direct molding.Belong to this kind of materials are: ABS/PMMA/PC/PA/PEEK/PEI.
规格
Specifications
|
螺杆直径 mm
Screw diameter
|
L/D
|
电机KW
Motor
|
最大挤出量kg/hr
Max output
|
|
|
CD-SSEP30
|
30
|
40
|
7.5
|
25
|
|
CD-SSEP 45
|
45
|
40
|
37
|
120
|
|
CD-SSEP 55
|
55
|
40
|
45
|
160
|
|
CD-SSEP 65
|
65
|
40
|
75
|
250
|
|
CD-SSEP 75
|
75
|
40
|
90
|
330
|
|
CD-SSEP 90
|
90
|
40
|
132
|
480
|
|
CD-SSEP 120
|
120
|
40
|
200
|
750
|
|
CD-SSEP 150
|
150
|
40
|
315
|
1000
|
|
CD-SSEP 180
|
180
|
40
|
355
|
1200
|
|
3、CD-SSEPET (PET-free drying and degassing extruder).This kind of extrusion machine is specially used for drying vent-free extrusion of PET material.Initial moisture content of less than 0.5% of PET chips or flakes, adoption of the extruder without crystallizing and drying direct extrusion sheet, good results can be obtained.
1.
According to different uses, high efficiency single screw extruder is divided into the following three categories:
1.CD-SSE (high efficiency single screw extruder).This kind of extrusion machine is mainly used in PE/PP/PS/PA/ABS and other materials, and does not require venting, can be directly used for sheet, plate, film, direct extrusion of pipes, profiles, etc. |